Download Datasheet

> SDR-RF 620B Datasheet


Contact Us to request a quote

SDR-RF 580/620/980SDR-RF 620B MODULE

SDR-RF 620B module is a low power and high performance RF transmitter-receiver solution designed for operation in C-band centered at 6.2 GHz. It is intended to interface with the processor module SDR-PM 402, which functions as a micro controller, processor and power management with a 24-pin flat flex cable (FFC) to form a standalone system.

Typical output power of the transmitter channel is 19 dBm. Single-ended SMA female connectors are installed for easy connection to antennas.

The receiver has an overall 3.4dB low noise figure with two stages of low-noise amplifier and exceptionally linear response with a flat gain of 28dB.

The ability of wide-range frequency-tuning makes this RF module ideal for applications with high-resolution wide-band and avoiding 5.8 GHz Wi-Fi interference.

For those who would like to avoid 5.8 GHz interference but stay in the C-band, please select this SDR-RF 620B module (6.0-6.4 GHz).

FEATURES

  • Coverage of the C-band frequency centered at 6.2 GHz
  • FMCW/FSK/CW waveforms
  • Wide bandwidth up to 400 MHz
  • Customized bandwidth expandable to 800 MHz
  • High conversion gain in the receiver channel
  • Low overall noise figure
  • Moderate output power
  • Low phase noise
  • Single +5V DC supply voltage
  • Low power consumption
  • SMA connectors for antennas
  • 24-pin FFC cable for connecting to our processor module
  • Suppression of cooling fan interference
  • On-board automatic correction of VCO nonlinearity
  • RF Shielding

 

BLOCK DIAGRAM

RF-transceiver (2)

Specification of SDR-RF 620B Module

Parameter Min. Typ. Max. Units
Frequency Range  6.0  6.4 GHz
Expandable Frequency Range  5.6  6.4 GHz
Tune Voltage  0  5  V
Tuning Sensitivity @RF Port  0.13  GHz/V
Power Output  18  19  20 dBm
SSB Phase Noise @10KHz offset  -80 dBc
SSB Phase Noise @1MHz offset -130 dBc
Conversion Gain Over Rx Channel  26  28  30 dB
Noise Figure over Rx channel  3.2  3.4  3.6 dB
Maximum input power  10 dBm
OIP3  35 dBm
IIP3 -5 dBm
IIP1dB -11 dBm
Supply voltage 4.75  5 5.25 V
Supply current 650  670 700 mA
Operating temperature -40 85 Co
Storage temperature -65 150 Co
Dimensions L=79  W=56   H=13 mm

SSB PHASE NOISE

SDR-RF 620 Phase Noise

Description of FFC Connector Pins

Pin Name Direction Description Pin Name Direction Description
1 GND comm Ground 13 I/007 in/out Spare
2 3.3V in 3.3V 14 I/008 in/out Spare
3 1.8V in 1.8V 15 I/009 in/out Spare
4 GND comm Ground 16 I/010 in/out Spare
5 Vcc in +5V 17 I/011 in/out Spare
6 GND comm Ground 18 I/012 in/out Spare
7 I/001 in/out Spare 19 Vtune in Vtune for VCO
8 I/002 in/out 12C_SCL 20 IF_I out IF in phase
9 I/003 in/out Spare 21 IF_Q out IF quadratic
10 I/004 in/out 12C_SDA 22 GND comm Ground
11 I/005 in/out Spare 23 Vcc in +5V
12 I/006 in/out Spare 24 Vcc in +5V